Instructions

tams elektronik
English Power-Block
Examples of use
 Connection of several consumers to a common power supply
(transformer, booster, power supply unit)
 Connection of several loads to the output of a circuit
 Connection of several loads to the common return conductor of a
circuit
Indicator LED
When connected to a DC voltage source, one of the two LEDs on the
board lights up to indicate on which side the positive voltage (+) is
applied. This prevents consumers from being accidentally connected to
a voltage source with the wrong polarity.
When connected to an AC voltage source, both LEDs light up.
Cascading of several boards
If the number of connections on one board is not sufficient, several
power distribution boards can be connected in series (cascaded). The
power consumption of all cascaded boards must not exceed 10 A.
Page 10