User manual

SK-4 English
Page 7
!
!
2. Operation overview
The 4-pole current transmitting couplings are designed for mounting in
scale H0 model railway vehicles with socket according to NEM 362. The
current is conducted via four contacts integrated into each coupling.
Technical specifications
Max. transmitted current: 0,5 A per wire
3. Mounting the couplings
The clip-in coupling is made for mounting to stock with socket NEM
362. Exchange the existing coupling for the SK-4-coupling. After the
exchange of the coupling continue with leading the connection wires
into the vehicle.
Attention:
The mobility of the bogie should not be obstructed by the connection
wires.
Only connect accessories in accordance with the manufactures
instructions.
Attention:
The maximum current per wire is 0,5 A. If you supply several
accessories from one wire, the collective current should not exceed this
value.
4. Checklist for troubleshooting
The current transmission via the coupling does not work.
Possible cause: The connection wires are not properly soldered in or
have been torn off. à Check the connections.
If you cannot find the problem, please return the couplings for repair
(address on the cover page).