User manual

Motor modification set English
Intended use
The set is designed for modifying model railroad locomotives with
alternating current (a.c.) motor according to the instructions in this
manual. Any other use is inappropriate and invalidates any guarantees.
The motor modification set should not be mounted by children under
the age of 14.
Reading, understanding and following the instructions in this manual
are mandatory for the user.
Checking the package contents
Please make sure that your package contains:
 one permanent magnet
PM-1 (for large flat circle-shaped commutator motor) or
PM-2 (for small flat circle-shaped commutator motor) or
PM-3 (for drum-shaped commutator motor);
 two mini chokes 3,3 µH;
 one capacitor 1,5 or 1,8 nF;
 this manual.
Required materials
For mounting and connecting the module you need:
 an electronic soldering iron (max. 30 Watt) or a regulated soldering
iron with a fine tip and a soldering iron stand,
 a tip-cleaning sponge,
 a heat-resistant mat,
 a small side cutter, wire stripper and a pair of tweezers,
 electronic tin solder (0,5 mm diameter).
Page 15
tams elektronik