User manual

tams elektronik
!
English FI-1
Example: Connecting dual-LEDs
The LEDs are connected that way the yellow parts light at forward
motion.
Connecting point FI-1 Connection to
X1 (colour: yellow) Function outputs of the vehicle decoder
X2 (colour: red)
X3 Return conductor for all outputs of the decoder
X4 Anodes (+) of the yellow LEDs of the dual-LEDs
X5 Anodes (+) of the red LEDs of the dual-LEDs
X6 Cathodes (-) of the dual-LEDs
Fig. 2: Connection Diagram
Caution:
If a component gets too hot, disconnect the module and power supply
from the mains immediately. Possible short circuit!
Fixing the module
Mount the PCB in a suitable position in the carriage as required, using
double sided adhesive tape for instance.
Page 22