User manual

tams elektronik
!
SAS modules English
5. Technical specifications
Caution:
The servo control SAS should not be supplied by the voltage supply for
the digital system! For that reason you should use a seperate
transformer for the SAS in digital controlled layouts.
Supply voltage 12 – 18 Volt a.c. voltage or
12 – 24 Volt d.c. voltage
Current consumption (without
connected devices) approx.
5 mA
Max. current at the servo output 1.000 mA
Protected to IP 00
Ambient temperature in use 0 ... +60 °C
Ambient temperature in storage -10 ... +80 °C
Comparative humidity allowed max. 85 %
Dimensions of the PCB (approx.)
SAS
HST
48 x 52 mm
48 x 52 mm
Weight of the circuit (approx.)
SAS
HST
17 g
25 g
Page 14