User manual

tams elektronik
English SAS modules
Servo control SAS-5 "Signals and Barriers"
Typical motion sequence of semaphore signals
and barriers with automatic stop when reaching
the end position.
variation 1: without encompassing of the signal
box´s worker (top illustration)
variation 2: with encompassing of the signal
box´s worker (bottom illustration)
No possibility to break the motion sequences.
Releasing the motion Operating the push-button causes starting the
motion into the opposite direction.
Push-button 1  motion sequence without
encompassing of the signal box´s worker.
Push-button 2  motion sequence with
encompassing of the signal box´s worker.
Digital Control Points decoders
+ 2 monostable relays (1xUm, 12 V,
e.g. item no. 84-61010-01)
points address e.g. "branch"  variant 1
points address e.g. "straight"  variant 2
Applications semaphore signals, barriers
Page 13