User manual

tams elektronik
SAS modules English
Possible settings
The motion sequences can be adapted to individual needs. By aid of
programming push-buttons you can set:
 starting and end position of the servo (within the limits given by the
maximum servo´s angle of rotation,
 servo´s rotational speed.
Servo control SAS-1 "Linear"
Linear motion between the two end positions
with automatic stop when reaching the end
position.
Constant velocity.
Possibility to break the motion sequences at
any time and position.
Releasing the
motion
push-button 1  direction 1
push-button 2  direction 2
Operating a push-button once again allows you
to break the motion sequence at any time and
position. Operating one of the two push-
buttons anew causes the motion sequence
being continued in direction 1 or 2.
Digital Control Points decoders
+ 2 monostable relays (1xUm, 12 V,
e.g. item no. 84-61010-01)
points address e.g. "branch"  direction 1
points address e.g. "straight"  direction 2
Applications Water stand pipes, doors
Page 10