Instructions
Table Of Contents
- Part A: General information
- Part B: LC-NG versions
- 1. LC-NG-01 "City Lighting"
- 2. LC-NG-02 "Residential buildings"
- 3. LC-NG-03 "Office and commercial buildings"
- 4. LC-NG-04 "Street lamps"
- 5. LC-NG-05 "Road traffic"
- 6. LC-NG-06 "Emergency vehicles"
- 7. LC-NG-07 "(Road) construction site"
- 8. LC-NG-08 "Fire station"
- 9. LC-NG-09 "Railway station"
- 10. LC-NG-10 "Workshop"
- 11. LC-NG-11 "Flickering flames & candle lights"
- 12. LC-NG-12 "Event"
- 13. LC-NG-13 "Chaser lights"
- 14. LC-NG-14 "Funfair lighting"
tams elektronik
LC-Modules Next Generation English
9.2. Pin assignment LC-NG-09
Connection of light bulbs
(→ page 24)
Connection of LEDs
(→ page 25)
1 Defective fluorescent lamp 1
*1
14 Fluorescent lamp 7
*1
2 Fluorescent lamp 2
*1
13 Fluorescent lamp 6
*1
3 Fluorescent lamp 3
*1
12 Fluorescent lamp 5
*1
4
Flashing light
12 Fluorescent lamp 4
*1
5 Flashing light 10 Room 5 / Signal box
*2
6 Room 1 / Signal box
*2
9 Room 4 / Signal box
*2
7 Room 2 / Signal box
*2
8 Room 3 / Signal box
*2
Required accessories
Light bulbs or
LEDs with suitable series resistors
*1
Tip: The effect is particularly realistic if very bright cool white or blue LEDs are connected.
*2
Tip: For use in the signal box, coloured LEDs or lamps can be used to simulate the change of
displays in the signal box.
Page 77