Instructions
Table Of Contents
- Part A: General information
- Part B: LC-NG versions
- 1. LC-NG-01 "City Lighting"
- 2. LC-NG-02 "Residential buildings"
- 3. LC-NG-03 "Office and commercial buildings"
- 4. LC-NG-04 "Street lamps"
- 5. LC-NG-05 "Road traffic"
- 6. LC-NG-06 "Emergency vehicles"
- 7. LC-NG-07 "(Road) construction site"
- 8. LC-NG-08 "Fire station"
- 9. LC-NG-09 "Railway station"
- 10. LC-NG-10 "Workshop"
- 11. LC-NG-11 "Flickering flames & candle lights"
- 12. LC-NG-12 "Event"
- 13. LC-NG-13 "Chaser lights"
- 14. LC-NG-14 "Funfair lighting"
tams elektronik
English LC-Modules Next Generation
Configuration
To change from the "simple flashing lights" setting to the "flashlights"
variant (or vice versa), proceed as described on page 35.
8.2. Pin assignment LC-NG-08
Connection of light bulbs
(→ page 24)
Connection of LEDs
(→ page 25)
Connection of a
loudspeaker
(→ page 30)
Connection of a servo
(→ page 32)
1 Gate Servo 14 Blue light 5
Tip: Connect an LC-
NG-06 "Emergency
vehicles" to one of
the outputs to
switch it on and off
automatically in the
event of an alarm.
2 Gate Switch 13 Blue light 4
3 Changing room 12 Blue light 3
4 Siren 11 Blue light 2
5 Room 1 10 Blue light 1
6 Room 2 9 Vehicle hall
7 Room 3 8 Warning lamp
Required accessories
Light bulbs or LEDs with suitable series resistors
one loudspeaker and components for filters (→ page 30)
one servo, one servo board and one resistor 470 (→ page 32)
Page 74