Instructions
Table Of Contents
- Part A: General information
- Part B: LC-NG versions
- 1. LC-NG-01 "City Lighting"
- 2. LC-NG-02 "Residential buildings"
- 3. LC-NG-03 "Office and commercial buildings"
- 4. LC-NG-04 "Street lamps"
- 5. LC-NG-05 "Road traffic"
- 6. LC-NG-06 "Emergency vehicles"
- 7. LC-NG-07 "(Road) construction site"
- 8. LC-NG-08 "Fire station"
- 9. LC-NG-09 "Railway station"
- 10. LC-NG-10 "Workshop"
- 11. LC-NG-11 "Flickering flames & candle lights"
- 12. LC-NG-12 "Event"
- 13. LC-NG-13 "Chaser lights"
- 14. LC-NG-14 "Funfair lighting"
tams elektronik
LC-Modules Next Generation English
7.7. Connecting subordinate circuits
You can connect lower-level circuits (e.g. other LC-NG modules) to the
outputs of an LC-NG module in order to switch them on and off. Please
note: Connecting lower-ranking circuits does not make sense with LC-
NG versions whose outputs are only switched on briefly.
You must connect the downstream circuit via a relay and a protective
diode (e.g. monostable relay 1xUm / 3 A / 12 V, item no. 84-61011-01)
if
the current of the circuit and the connected loads is higher than 200
mA or
galvanic isolation is required, i.e. the circuit is connected with
another type of current or to another circuit.
Page 33