Instructions
Table Of Contents
- Part A: General information
- Part B: LC-NG versions
- 1. LC-NG-01 "City Lighting"
- 2. LC-NG-02 "Residential buildings"
- 3. LC-NG-03 "Office and commercial buildings"
- 4. LC-NG-04 "Street lamps"
- 5. LC-NG-05 "Road traffic"
- 6. LC-NG-06 "Emergency vehicles"
- 7. LC-NG-07 "(Road) construction site"
- 8. LC-NG-08 "Fire station"
- 9. LC-NG-09 "Railway station"
- 10. LC-NG-10 "Workshop"
- 11. LC-NG-11 "Flickering flames & candle lights"
- 12. LC-NG-12 "Event"
- 13. LC-NG-13 "Chaser lights"
- 14. LC-NG-14 "Funfair lighting"
tams elektronik
!
LC-Modules Next Generation English
Connect further "chains" of series-connected LEDs in parallel to the
same output. Make sure that you do not exceed the maximum current
of 200 mA. If the current of each individual "chain" is limited to 10 mA,
for example, you can connect 20 chains in parallel to one output.
Please note: You cannot load all 14 outputs with 200 mA each,
because then the maximum total current of the module of 1,000 mA
would be exceeded. If the maximum total current is exceeded, the
module will be irreparably damaged.
Page 29