Instructions
Table Of Contents
- Part A: General information
- Part B: LC-NG versions
- 1. LC-NG-01 "City Lighting"
- 2. LC-NG-02 "Residential buildings"
- 3. LC-NG-03 "Office and commercial buildings"
- 4. LC-NG-04 "Street lamps"
- 5. LC-NG-05 "Road traffic"
- 6. LC-NG-06 "Emergency vehicles"
- 7. LC-NG-07 "(Road) construction site"
- 8. LC-NG-08 "Fire station"
- 9. LC-NG-09 "Railway station"
- 10. LC-NG-10 "Workshop"
- 11. LC-NG-11 "Flickering flames & candle lights"
- 12. LC-NG-12 "Event"
- 13. LC-NG-13 "Chaser lights"
- 14. LC-NG-14 "Funfair lighting"
tams elektronik
English LC-Modules Next Generation
LC-NG version Action
LC-NG-01 "City lighting" Starting / stopping the sequence
LC-NG-02 "Residential buildings" Switching between the programme
variants (until version 06/2021)
Synchronisation on/off and
configuration* (from version 06/2021)
LC-NG-03 "Office and commercial
buildings"
Switching on and off the lights in
units 1 to 8
LC-NG-04 "Street lamps" Switching the lanterns on and off
Configuration*
LC-NG-05 "Road traffic" Switching between standard
operation and flashing yellow of
the traffic lights
Configuration*
LC-NG-06 "Emergency vehicles" Starting / stopping the sequence
Configuration*
LC-NG-08 "Fire station" Configuration*
LC-NG-09 "Railway station" Starting / stopping the sequence
LC-NG-10 "Workshop" Fluorescent lamps on/off
LC-NG-11 "Fire flares & candles" Starting / stopping the sequence
LC-NG-12 "Event" Switching between normal and
show mode
LC-NG-13 "Chaser lights" Configuration*
LC-NG-14 "Funfair lighting" Configuration*
* During configuration of the module, the switching input must be temporarily connected to
ground. Connecting a switch during configuration is helpful, but not necessary.
Page 22