Instructions

tams elektronik
!
English LC-Modules Next Generation
Fire risk
Touching flammable material with a hot soldering iron can cause fire, which
can result in injury or death through burns or suffocation. Connect your
soldering iron or soldering station only when actually needed. Always keep
the soldering iron away from inflammable materials. Use a suitable
soldering iron stand. Never leave a hot soldering iron or station unattended.
Thermal danger
A hot soldering iron or liquid solder accidentally touching your skin can
cause skin burns. As a precaution:
 use a heat-resistant mat during soldering,
 always put the hot soldering iron in the soldering iron stand,
 point the soldering iron tip carefully when soldering, and
 remove liquid solder with a thick wet rag or wet sponge from the
soldering tip.
Dangerous environments
A working area that is too small or cramped is unsuitable and can cause
accidents, fires and injury. Prevent this by working in a clean, dry room
with enough freedom of movement.
Other dangers
Children can cause any of the accidents mentioned above because they
are inattentive and not responsible enough. Children under the age of 14
should not be allowed to work with this kit or the ready-built module.
Caution: Little children can swallow small components with
sharp edges, with fatal results! Do not allow components to reach
small children.
In schools, training centres, clubs and workshops, assembly must be
supervised by qualified personnel. In industrial institutions, health and
safety regulations applying to electronic work must be adhered to.
Page 10