Instructions
Table Of Contents
- Part A: General information
- Part B: LC-NG versions
- 1. LC-NG-01 "City Lighting"
- 2. LC-NG-02 "Residential buildings"
- 3. LC-NG-03 "Office and commercial buildings"
- 4. LC-NG-04 "Street lamps"
- 5. LC-NG-05 "Road traffic"
- 6. LC-NG-06 "Emergency vehicles"
- 7. LC-NG-07 "(Road) construction site"
- 8. LC-NG-08 "Fire station"
- 9. LC-NG-09 "Railway station"
- 10. LC-NG-10 "Workshop"
- 11. LC-NG-11 "Flickering flames & candle lights"
- 12. LC-NG-12 "Event"
- 13. LC-NG-13 "Chaser lights"
- 14. LC-NG-14 "Funfair lighting"
tams elektronik
English LC-Modules Next Generation
LC-NG-13 :
Setting the programme variant(s)
You can activate or deactivate one or more variants. Variants that are
already activated are indicated by the light or LED at the assigned
outputs lighting up after switching to programming mode.
Note: For the variant that is currently selected for programming, the
current state is not displayed, but the state that the variant has after
confirming the setting. When starting programming mode with the
trim pot set to the right stop, a switched-off LED/lamp at output 8
thus indicates that variant 8 is active and a switched-on LED/lamp
indicates that variant 8 is inactive.
Page 38