Instructions
Table Of Contents
- Part A: General information
- Part B: LC-NG versions
- 1. LC-NG-01 "City Lighting"
- 2. LC-NG-02 "Residential buildings"
- 3. LC-NG-03 "Office and commercial buildings"
- 4. LC-NG-04 "Street lamps"
- 5. LC-NG-05 "Road traffic"
- 6. LC-NG-06 "Emergency vehicles"
- 7. LC-NG-07 "(Road) construction site"
- 8. LC-NG-08 "Fire station"
- 9. LC-NG-09 "Railway station"
- 10. LC-NG-10 "Workshop"
- 11. LC-NG-11 "Flickering flames & candle lights"
- 12. LC-NG-12 "Event"
- 13. LC-NG-13 "Chaser lights"
- 14. LC-NG-14 "Funfair lighting"
tams elektronik
!
English LC-Modules Next Generation
7.5. Connecting a loudspeaker (LC-NG-05,-06,-08)
Connecting a loudspeaker is only possible with LC-NG modules that
have a corresponding output. You need a loudspeaker set (item no. 53-
04311-01) or a loudspeaker with an impedance of at least 8 Ω. The
sound quality is better if you use a loudspeaker with a higher
impedance (e.g. 32 or 50 Ω). In addition, you need as a filter
a choke 1 mH
two resistors 220 Ω/0.25 W or one resistor 470 Ω/1 W
an electrolytic capacitor 22 μF/25 V*
Chokes and resistors are not polarised, so they can be installed in any
direction.
Please note:
Electrolytic capacitors
are polarised. When
connecting them, make
sure that you connect
the positive pole to the
return line and the
negative pole to the
supply line. If the
connections are
reversed, the electrolytic
capacitor may explode
during commissioning
and possibly damage
other components.
Page 30