Instructions
Table Of Contents
- Part A: General information
- Part B: LC-NG versions
- 1. LC-NG-01 "City Lighting"
- 2. LC-NG-02 "Residential buildings"
- 3. LC-NG-03 "Office and commercial buildings"
- 4. LC-NG-04 "Street lamps"
- 5. LC-NG-05 "Road traffic"
- 6. LC-NG-06 "Emergency vehicles"
- 7. LC-NG-07 "(Road) construction site"
- 8. LC-NG-08 "Fire station"
- 9. LC-NG-09 "Railway station"
- 10. LC-NG-10 "Workshop"
- 11. LC-NG-11 "Flickering flames & candle lights"
- 12. LC-NG-12 "Event"
- 13. LC-NG-13 "Chaser lights"
- 14. LC-NG-14 "Funfair lighting"
tams elektronik
!
English LC-Modules Next Generation
Assembly
Finished module
1. Electrolytic
capacitor
Pay attention to the polarity!
If you solder in electrolytic capacitors with the
wrong polarity, they will be destroyed during
commissioning. In the worst case, the entire
module can be damaged.
One of the two connections (the shorter one)
is marked with a minus sign.
2. Trim pot The installation direction is determined by the
arrangement of the three connections.
3. Screw terminals Plug the 7-pole terminals together before
installation.
Page 18