Instructions

tams elektronik
LC-Modules Next Generation English
4. Operation overview
The LC-NG module is controlled by a micro-controller. The programme
stored in the micro-controller
 controls the 14 outputs of the module. The sequence and timing
differ between the different versions.
 defines whether and to which outputs servos and/or loudspeakers
can be connected.
 defines what effect the switching input and the trim potentiometer
have on the programme sequence.
Switching outputs
The following can be connected to the 14 outputs
 lights or LEDs (via series resistors)
 other circuits (possibly via a relay)
 servos and/or loudspeakers on some versions
Switching input
Depending on the version and whether the module's switching input is
connected to earth or not,
 the programme is started or ended;
 a special action is triggered;
 one or the other variant of a programme is played.
Configuration
With several versions of the LC-NG module, an individual configuration
is possible, e.g. the selection of a programme variant. The setting is
saved and cannot be changed during operation.
Page 13