Instructions
Table Of Contents
- Part A: General information
- Part B: LC-NG versions
- 1. LC-NG-01 "City Lighting"
- 2. LC-NG-02 "Residential buildings"
- 3. LC-NG-03 "Office and commercial buildings"
- 4. LC-NG-04 "Street lamps"
- 5. LC-NG-05 "Road traffic"
- 6. LC-NG-06 "Emergency vehicles"
- 7. LC-NG-07 "(Road) construction site"
- 8. LC-NG-08 "Fire station"
- 9. LC-NG-09 "Railway station"
- 10. LC-NG-10 "Workshop"
- 11. LC-NG-11 "Flickering flames & candle lights"
- 12. LC-NG-12 "Event"
- 13. LC-NG-13 "Chaser lights"
- 14. LC-NG-14 "Funfair lighting"
tams elektronik
English LC-Modules Next Generation
Configuration
To set one of the five variants, proceed as described on page 35.
14.2. Pin assignment LC-NG-14
Note that the outputs for the different programme variants are
combined into groups of different sizes, which together form e.g. a
chaser.
Output
Connection options
1 … 14
Light bulbs (→ page 24 )
Note: The maximum current of the LC-NG
module is 1,000 mA and the maximum
current per output is 200 mA. When
connecting several lamps to one output,
these maximum values can easily be
exceeded and the module or the output
will usually be irreparably damaged.
1 … 14
LEDs (→ page 25 )
Required accessories
Light bulbs (only suitable to a limited extent) or
LEDs with suitable series resistors
Page 90