User manual

tams elektronik
English WBA-1 | WBA-2 | WBA-3
Performing a visual check
Perform a visual check after the assembly of the module and remove
faults if necessary:
 Remove all loose parts, wire ends or drops of solder from the PCB.
Remove all sharp wire ends.
 Check that solder contacts which are close to each other are not
unintentionally connected to each other. Risk of short circuit!
 Check that all components are polarised correctly.
When you have remedied all faults, go on to the next part.
7. Connecting the double flashlight
WBA-1 WBA-2 WBA-3
Connecting a LED
Page 14
Transformer
Trafo
Trafo
Transformer
Transformer