User manual

tams elektronik
!
English LC modules
PCB layout and parts list
Resistors R1 - R5 10 k
R6, R8 1 k
Diodes D1 1N400x,
x=2...7
D3 1N4148
Zener diode D2 ZD 5,1 V
Electrolytic
capacitors
C1, C2 100 µF/25 V
Transistors T1 - T5 BC547B
Micro-controller IC1 12F508A-I/P
IC-socket IC-1 8-pole
Solder pins JP2 1-pole
JP1 / JP4 3-pole
JP3 5-pole
LC-16 only:
Dim switch DS-1
Light sensitive resistor R11
Assembly
Proceed according to the order given in the list below. First solder the
components on the solder side of the PCB and then cut the excess wires
with the side cutter. Follow the instructions on soldering in section 3.
Caution: Several components have to be mounted according to
their polarity. When soldering these components the wrong way
round, they can be damaged when you connect the power. In the
worst case the whole circuit can be damaged. At the best, a wrongly
connected part will not function.
Page 20