User manual

tams elektronik
English WIB-33.2
Basic settings for the LEDs and the outputs
Name of CVs /
Registers
CV-
no.
Reg.
no.
Input value
(Default)
Remarks and Tips
Settings
Configuration
data 2
115 40 1 ... 255 (4) Fluorescent tube
simulation off 0
Fluorescent tube
simulation on 1
Random light for AUX1 off 0
Random light for AUX1 on 2
Random light for AUX3 off 0
Random light for AUX3 on 4
LDR performance
"standard" 0
LDR performance inverted 8
Factory settings:
Fluorescent tube simulation
= "off". AUX3 = random light.
Dim switch (via LDR) switches the
LEDs and the devices connected to
the outputs on when the limit
value of the surrounding lighting is
under-run.
Outputs programmed as random
lights cannot be switched via
function keys.
function key
for LDR
settings in CV#112 define
F1-F4 and F0 0
settings in CV#112 define
F5-F12 16
function key
for
orientation
light
settings in CV#118 define
F1-F4 and F0 0
settings in CV#118 define
F5-F12 32
function key
for AUX1
settings in CV#121 define
F0-F7 0
settings in CV#121 define
F8-F15 64
function key
for AUX3
settings in CV#123 define
F0-F7 0
settings in CV#123 define
F8-F15 128
Function keys for switching the 8 LEDs
Name of CVs /
Registers
CV-
no.
Reg.
no.
Input value
(Default)
Remarks and Tips
Settings
F0 forward on 33 11 0 ... 255 (0) LED 1 1
F0 backward on 34 12 0 ... 255 (0) LED 2 2
F1 35 13 0 ... 255 (170) LED 3 4
F2 36 14 0 ... 255 (85) LED 4 8
... ... ... 0 ... 255 (0) LED 5 16
F12 46 24 0 ... 255 (0) LED 6 32
LED 7 64
LED 8 128
Factory settings:
F1 switches the LEDs 2, 4, 6 and 8 (CV#35 = 2 + 8+ 32 + 128),
F2 the LEDs 1, 3, 5 und 7 (CV#36 = 1 + 4+ 16 + 64).
The other functions keys do not have any effects on the LEDs.
Function keys for switching AUX1 and AUX3
Name of CVs /
Registers
CV-
no.
Reg.
no.
Input value
(Default)
Value in CV#115
0 64 / 128
AUX1 121 43 1 ... 255 (1) F0 F8 1
AUX3 123 44 1 ... 255 (64) F1 F9 2
It is possible to activate the function with several function
keys.
Remark: If you want to assign the function keys F8 to F15
to this function you have to set the value "64" in CV#115
for AUX1 or/and the value "128" in in CV#115 for AUX3
first.
Factory settings: AUX1 is activated with F0, AUX3 with F6
(if in CV#115 the random light for AUX3 is switched off).
F2 F10 4
F3 F11 8
F4 F12 16
F5 F13 32
F6 F14 64
F7 F15 128
Function keys for switching AUX2
Name of CVs /
Registers
CV-
no.
Reg.
no.
Input value
(Default)
Remarks and Tips
Settings
AUX2 122 45 1 ... 255 (1) F0 1
It is possible to activate the function with several
function keys.
Factory settings: AUX2 is activated with F0.
F1 2
F2 4
F3 8
F4 16
F5 32
F6 64
F7 128
Page 16