User manual

tams elektronik
!
English WIB-13.2
6.2. Connection to the power supply
Solder the connecting wires for the power supply to the
connecting points P1, P3, P5 or P7 (from the one rail /
centre conductor) and the connecting points P2, P4, P6
or P8 (from the other rail / outer conductor). Follow the
connection diagram.
You can loop through the power supply from one PCB
to the next and thus supply several carriage lighting
from one current source. Follow the connection
diagram.
Caution:
When using power transmissing couplings pay attention
not to exceed the maximum current of the couplings!
Page 8