User manual

GBM-8 English
Page 23
Checking the package contents
Please make sure that your package contains:
§ one kit, containing the components listed in the parts list and one
PCB,
§ or one ready-built module,
§ or one complete unit (ready-built module in a housing,
§ one manual.
Required materials
For assembling the kit you need:
§ an electronic soldering iron (max. 30 Watt) with a fine tip,
§ a soldering iron stand,
§ a tip-cleaning sponge,
§ a heat-resistant mat,
§ a small side cutter and wire stripper,
§ a pair of tweezers and long nose pliers,
§ tin solder (0,5 mm. diameter),
In order to connect the module you need wire. Recommended
diameters: > 0,25 mm² for all connections.
To display the busy status you need:
§ LEDs and suitable series resistors and / or
§ digital feed back modules (e.g. s88-feed back modules)