User manual

English Multi-Timer
Setting the switching times
You set the swtching times and with operation mode 4 the starting and
braking delay as well as the voltage supply when starting at the four
trim-pots related to the outputs. When setting the trim-pot as far as it
will go to the right you will define the maximum value.
Please notice that with operation mode 3 "random switch" not the
maximum toggling time is set, but the time interval, which elapses
before the Multi-Timer decides at random if to toggle the output or
not.
Operation
mode
Trim-pot 1
output 1→
Trim-pot 2
output 2→
Trim-pot 3
output 3→
Trim-pot 4
output 4→
1 Switching time
2 Delay time
3 Time interval between two decisions to toggle or not
4 Length of
time for
braking
Length of
stay
Length of
time for
starting
Voltage at
the track
when
starting
Page 54
tams elektronik