Instructions

tams elektronik
!
English Multi-Timer
Intended use
The Multi-Timer is designed to be operated according to the
instructions in this manual in model building, especially with model
railways. Any other use is inappropriate and invalidates any guarantees.
The Multi-Timer should not be assembled or mounted by children under
the age of 14.
Reading, understanding and following the instructions in this manual
are mandatory for the user.
Caution:
The Multi-Timer contains integrated circuits. These are very sensitive
to static electricity. Do not touch components without first discharging
yourself. Touching a radiator or other grounded metal part will
discharge you.
Checking the package contents
Please make sure that your package contains:
 one kit, containing the components listed in the parts list (→ page
24) and one PCB or
 one ready-built module or
 one ready-built module in a housing (complete unit)
 4 short circuit connectors (jumper) to set the operation mode
To assemble the kit you will need
 a soldering iron with temperature control and a thin tip and a deposit
stand or a controlled soldering station
 a scraper, rag or sponge
 a heat-resistant pad
 a small pair of side cutters and wire strippers
 tweezers and flat-nose pliers if necessary
 electronic solder (preferably 0.5 to 0.8 mm diameter)
Page 4