Instructions
Table Of Contents
- 1. Getting started
- 2. Safety instructions
- 3. Safe and correct soldering
- 4. Operation overview
- 5. Technical specifications
- 6. Assembling the kit
- 7. Connecting the Multi-Timer
- 8. Setting the Multi-Timer
- 9. Check list for troubleshooting
- 10. Guarantee bond
- 11. EU Declaration of Conformity
- 12. Declarations concerning the WEEE directive
tams elektronik
Multi-Timer English
Example 2: Signal set to "Clear" (switching input 1 open)
Passing the sensor at the beginning of the braking track has no effect,
the braking process is not started. The state of switching input 3 has
no effects, too.
Hint: If the signal would be set to "Stop" before the locomotive has
passed, it would stop (abruptly) at the signal or in the security section
switched currentless in front of the signal.
Page 17