Instructions
Table Of Contents
- 1. Getting started
- 2. Safety instructions
- 3. Safe and correct soldering
- 4. Operation overview
- 5. Technical specifications
- 6. Assembling the kit
- 7. Connecting the Multi-Timer
- 8. Setting the Multi-Timer
- 9. Check list for troubleshooting
- 10. Guarantee bond
- 11. EU Declaration of Conformity
- 12. Declarations concerning the WEEE directive
tams elektronik
English Multi-Timer
2. The locomotive stops in front of the signal until the hold time has
expired (and switching input 1 has been switched to "open"
automatically) or until switching input 1 has been opened (e.g. by
means of an external switch).
By closing switching input 3 (e.g. by means of an external switch) while
keeping switching input 1 closed at the same time, you can prolong the
hold time and prevent switching input 1 from automatically been
opened after the halting has expired. If switching input 3 is opened
before the set hold time has expired, the automatic operation will be
restarted after the hold time has expired.
Page 16