User manual

tams elektronik
Booster-Link English
Page 29
Possible Cause: The decoder does not send the mfx
®
feed back
data to the central unit.  Check the decoder by setting the vehicle
on to a rail section supplied by the booster integrated into the
mfx
®
central unit.
Hotline
If problems with your module occur, our hotline is pleased to help you.
(address on the cover page).
9. CE and Warranty
Certification (CE)
This product conforms with the EC-directives mentioned
below and is therefore CE certified.
2004/108/EG on electromagnetic. Underlying standards: EN 55014-1
and EN 61000-6-3. To guarantee the electromagnetic tolerance in
operation you must take the following precautions:
 Connect the transformer only to an approved mains socket installed
by an authorised electrician.
 Make no changes to the original parts and accurately follow the
instructions, connection diagrams and PCB layout included with this
manual.
 Use only original spare parts for repairs.
2011/65/EG on the restriction of the use of certain hazardous
substances in electrical and electronic equipment (ROHS). Underlying
standard: EN 50581.