User manual

tams elektronik
English KSM-3
Checking the package contents
Please make sure that your package contains:
 one kit, containing the components listed in the parts list
( page 19) and one PCB or
 one ready-built module or
 one ready-built module in a housing (complete unit),
 a CD (containing the manual and further information).
Required materials
For assembling the kit you need:
 an electronic soldering iron (max. 30 Watt) or a regulated soldering
iron with a fine tip and a soldering iron stand,
 a tip-cleaning sponge,
 a heat-resistant mat,
 a small side cutter and wire stripper,
 as necessary a pair of tweezers and long nose pliers,
 electronic tin solder (0,5 mm. diameter).
In order to connect the module you need wire. Recommended
diameters:
 connection of the rails:
gauges Z and N: > 0,75 mm²
other gauges: > 1,5 mm²
 connection of the points: > 0,25 mm²
When using motor-run points, you need an addtional adapter for
motor-run points AMW-1 (item-no. 72-00076).
Page 4