User manual

tams elektronik
English KSM-2
Checking the package contents
Please make sure that your package contains:
 one kit, containing the components listed in the parts list
( page 18) and one PCB or
 one ready-built module with a jumper put onto JP1 or
 one ready-built module with a jumper put onto JP1 in a housing
(complete unit),
 a CD (containing the manual and further information).
Required materials
For assembling the kit you need:
 an electronic soldering iron (max. 30 Watt) or a regulated soldering
iron with a fine tip and a soldering iron stand,
 a tip-cleaning sponge,
 a heat-resistant mat,
 a small side cutter and wire stripper,
 as necessary a pair of tweezers and long nose pliers,
 electronic tin solder (0,5 mm. diameter).
In order to connect the module you need wire. Recommended
diameters: > 0,25 mm² for all connections.
Seite 4