User manual

tams elektronik
!
!
English KSM-2
Assignment of the connections
There are terminal strips soldered to the module which are used to
insert and screw on the connecting cables.
1 | 2
Outputs of the integrated track busy indicator
1 Record input of the digital feedback module→
2 Mass connection of the digital feedback module→
(optional connection)
3 | 4
Voltage supply (tranformer)
The polarity is of no importance.
Caution: Do not connect the KSM-2 to the power
supply of the digital system. The occuring fault current can
damage the module irreparably!
5 | 6 Transition zone 1
5 outer rail→
6 inner rail → (together with inner rail of transition zone 2)
7 | 6
Transition zone 2
7 → outer rail
6 inner rail → (together with inner rail of transition zone 1)
8 | 9
Rails outside the loop
10 | 11
Inner section of the loop
10 → outer rail
11 inner rail→
JP1
RailCom detector
Please note: In case there is no RailCom detector
to be connected, the connecting pins JP1 have to be
bridged, e.g. with the short-circuit termination (jumper)
included in the package
Seite 24