User manual

English s88-BiDiB-Link
3. Safety instructions
Risk of electric shock
 Touching powered, live components,
 touching conducting components which are live due to malfunction,
 short circuits and connecting the circuit to another voltage than
specified,
 impermissibly high humidity and condensation build up
can cause serious injury due to electrical shock. Take the following
precautions to prevent this danger:
 Only operate indoors in a dry environment.
 Never perform wiring on a powered module.
 Only use low power for this device as described in this manual and
only use certified transformers.
 Only connect the transformer in an authorised manner to the house
power supply.
 Use adequetly thick cable for all wiring. Too thin a cable can
overheat.
 If the layout is exposed to condensation, allow at least two hours for
drying out.
Page 6