User manual

tams elektronik
English S88-3
Checking the package contents
Please make sure that your package contains:
 one kit, containing the components listed in the parts list
(page 14)and one PCB or
 one ready-built module or
 one ready-built module in a housing (complete unit),
 an Ethernet patch cable with RJ-45 connectors (length: 0.5 m)
 a CD (containing the manual and further information).
Required materials
For assembling the kit you need:
 an electronic soldering iron (max. 30 Watt) or a regulated soldering
iron with a fine tip and a soldering iron stand,
 a tip-cleaning sponge,
 a heat-resistant mat,
 a small side cutter and wire stripper,
 as necessary a pair of tweezers and long nose pliers,
 electronic tin solder (0.5 mm diameter).
In order to connect the module to the rails you need wire.
Recommended diameter: > 0.25 mm².
For the connection of the module to a device with a 6-pole s88
connector you need depending on the installation situation:
 an adapter S88-A (depending on the installation situation item no.
44-09100, 44-09110, 44-09200 or 44-09210) and / or
 a 6-conductor connecting cable (e.g. item no. 44-09250 or 44-09750).
Page 4