User manual

tams elektronik
English SD-34 | SD-34.2
Checking the package contents
Please make sure that your package contains:
 one kit SD-34, containing the components listed in the parts list and
one PCB or
 one ready-built module SD-34 or SD-34.2 or
 one ready-built module SD-34 or SD-34.2 in a housing (complete
unit)
 SD-34 only: one jumper for programming the address
 a CD (containing the manual and further information)
Required materials
For assembling the kit you need:
 an electronic soldering iron (max. 30 Watt) or a regulated soldering
iron with a fine tip and a soldering iron stand,
 a tip-cleaning sponge,
 a heat-resistant mat,
 a small side cutter and wire stripper,
 as necessary a pair of tweezers and long nose pliers,
 electronic tin solder (0,5 mm. diameter).
In order to connect the module you need wire. Recommended
diameters: > 0,25 mm² for all connections.
Page 4