User manual

tams elektronik
English SD-34 | SD-34.2
Programming the basic features
Name of CVs CV-
no.
Input value
(Default)
Remarks and tips
Version 7 --- Read only!
Manufacturer 8 (62) Read only!
Reset 8 0 ... 255 Any input value restores the
settings in state of delivery.
Programming the configuration data for the SD-34
Name of CVs CV-
no.
Input value
(Default)
Remarks and tips
Configuration
data 1
→ SD-34
29 128, 136
(136)
RailCom off 128
RailCom on 136
Configuration
data 1
→ SD-34.2
29 0, 8, 128, 136
(136)
RailCom off 0
RailCom on 8
Operation via
points addresses 0
locomotive addresses 128
Advice: When RailCom is not used it is recommended to switch it off in CV#29.
Configuration
data 2
33 0, 1
(0)
RailCom check on 0
RailCom check off 1
In standard operation the decoder checks directly after having been switched on if the
booster for the connected section supplies a RailCom cutout. In case faulty detections are
mounting the RailCom check should be switched off. This has no effect on the feedback with
RailCom.
Page 26