User manual

tams elektronik
!
!
English SD-34 | SD-34.2
7. Connecting the decoder
The decoder has terminal strips inserted to plug in and screw on the
connecting wires. Make the connections one after the other:
 to the accessories
 the central unit
 the power supply
Power supply
You can supply the decoder either via the central unit or via a seperate
transformer according to the two following diagrams.
Fig. 2: Power supply via central unit Fig. 3: Power supply via separate transformer
Caution: Switch off the central unit before connecting the
decoder.
Caution: If a component gets too hot, disconnect the decoder
and the power supply from the mains immediately. Possible short
circuit! Check the assembly!
Page 20