Instructions
Table Of Contents
- 1. Getting started
- 2. Safety instructions
- 3. Safe and correct soldering
- 4. Operation overview
- 5. Technical specifications
- 6. Connections
- 7. Programming
- 8. Configuration variables and registers
- 9. Check list for troubleshooting
- 10. Guarantee bond
- 11. EU Declaration of Conformity
- 12. Declarations concerning the WEEE directive
- 13. The asterisks **
tams elektronik
English FD-R Basic.3
8.8. Setting the address
Name No. Input values
(Default)
Remarks and tips
Basic address 1 1 ... 255
(3)
Range of values:
in DCC format: 1 ... 127
in MM format: 1 … 255
Tip: If a value higher than 127 is set for the basic address and the
use of extended addresses in CV 29 is set to off, the decoder does not
react to signals in DCC format!
Extended
address
17 192 ... 255
(195)
Only for DCC format.
Most central units permit
entering extended addresses
directly. The CVs 17, 18 and 29
are set automatically to the
proper values.
18 0 ... 255
(232)
Consist
address
19 1 ... 127
(0)
Address for consist operation
(multi-traction)
In DCC format only!
Page 46