Instructions
Table Of Contents
- 1. Getting started
- 2. Safety instructions
- 3. Safe and correct soldering
- 4. Operation overview
- 5. Technical specifications
- 6. Connections
- 7. Programming
- 8. Configuration variables and registers
- 9. Check list for troubleshooting
- 10. Guarantee bond
- 11. EU Declaration of Conformity
- 12. Declarations concerning the WEEE directive
- 13. The asterisks **
tams elektronik
English FD-R Basic.3
8.3. Effects of the outputs
Assignment of the effects to the outputs
Output No. Input values
(Default)
Remarks and tips
F0f 57 0 ... 255 (0) no effects 0
F0r 58 0 ... 255 (0) Function inverted 1
AUX1 59 0 ... 255 (0)
Flashing on 2
AUX2 60 0 ... 255 (0)
Kicking on 4
Example: Alternating flashing with AUX1 and AUX2:
→ Input value for AUX1: CV 59 = 2 | Input value for AUX2: CV 60 = 3 (1 + 2)
Flashing frequency
Output No. Input values
(Default)
Remarks and tips
F0f 101 1 ... 255 (20) Setting separately for each
output.
1 = highest flashing frequency
255 = lowest flashing frequency
Note: The flashing function must be
switched on for the output.
(CV 57 - 60)
F0r 102 1 ... 255 (20)
AUX1 103 1 ... 255 (20)
AUX2 104 1 ... 255 (20)
Page 38