Instructions

tams elektronik
FD-R Basic.3 English
Example: Programming for rear end signal "off"
with coupled carriages
Hint: The connection of the return conductor is not shown.
Outputs
off/on with
function
F0f F0r 1 2
Values
1 2 4 8 1 … 254
CV
name
CV-No.
Set value
CV-No.
Set value
F0 f 257 5 (outputs F0f and AUX1) 260 5 (F5=coupled carriage)
F0 r 261 10 (outputs F0r and AUX2) 264 5 (F5=coupled carriage)
F5 f 297 4 (output AUX1) 268 (255 = off)
F5 r 301 2 ( output F0r) 272 (255 = off)
With this programming you achieve the following effects when
changing to operation with coupled carriages (here using function F5):
 the signals appropriate for the direction of motion will be switched
on and
 the signals on the side of the coupled carriages will be switched off.
Page 37