Instructions
Table Of Contents
- 1. Getting started
- 2. Safety instructions
- 3. Safe and correct soldering
- 4. Operation overview
- 5. Technical specifications
- 6. Connections
- 7. Programming
- 8. Configuration variables and registers
- 9. Check list for troubleshooting
- 10. Guarantee bond
- 11. EU Declaration of Conformity
- 12. Declarations concerning the WEEE directive
- 13. The asterisks **
tams elektronik
English FD-R Basic.3
8.1. Basic settings
Name No. Input values
(Default)
Remarks and tips
Configuration
data 1
29 0 ... 255
(14)
Direction "Standard" 0
Reverse direction 1
14 speed levels 0
28 or 128 speed levels 2
Analogue recognition off 0
Analogue recognition on 4
RailCom off 0
RailCom on 8
Basic addresses 0
For DCC format only:
Extended addresses 32
Tip: If the use of extended addresses is
activated in CV 29, the decoder does not
react to signals in Motorola format!
Example: CV 29 = 0 → Direction = "Standard". 14 speed levels . Automatic analogue
recognition = "off". RailCom ="off". Basic addresses.
Example: CV 29 = 46 → Direction = "Standard". 28 or 128 speed levels in DCC mode.
Automatische Analogerkennung = "on". RailCom = "on". Extended addresses.
Page 30