User manual

tams elektronik
FD-R Basic 2 English
Basic settings
Name of CVs /
MM-registers
No. Input value
(Default)
Remarks and Tips
Consist-
Control
for F1 to F8
21 0 ... 255 (0) F1 on 1
F2 on 2
F3 on 4
F4 on 8
F5 on 16
F6 on 32
F7 on 64
F8 on 128
Settings in CV #21 have no effect unless in CV #19 a consist address has been programmed.
RailCom
settings
28 0 ... 3 (3)
no feedback 0
channel 1 on 1
channel 2 on 2
Channel 1: Continuous feedback of the decoder address
Channel 2: Feedback of the CV values after a RailCom read-out command
Configuration
data 1
29 0 ... 64 (14)
Direction "Standard" 0
Reverse direction 1
14 speed levels 0
28 or 128 speed levels 2
Analoge recognition off 0
Analoge recognition on 4
RailCom off 0
RailCom on 8
Basic addresses 0
Not for MM mode:
Extended addresses 32
Factory settings: Direction = "Standard". 28 or 128 speed levels in DCC-mode. Automatic
analogue recognition = "on". RailCom = "on". Basic addresses.
Example: CV #29 = 0. à Direction = "Standard". 14 speed levels. Automatic analogue
recognition = "off". RailCom = "off". Basic addresses.
Example: CV #29 = 46. à Direction = "Standard". 28 or 128 speed levels in DCC-mode.
Automatic analogue recognition = "on". RailCom = "on". Extended Addresses.
Tip: If the use of extended addresses is activated in CV #29, the decoder does not react to
signals in Motorola format!
Page 29