User manual

tams elektronik
English FD-R Extended
Assignment to the switching inputs
Name of CVs /
registers
No. Input value
(Default)
Remarks and Tips
Assigning the function outputs to the switching inputs
IN1 59 0 … 63 (0) AUX1 1
IN2 61 0 … 63 (0) AUX2 2
IN3 63 0 … 63 (0) AUX3 4
AUX4 8
AUX5 16
AUX6 32
Assigning the servo positions to the switching inputs
IN1 60 0, 1, 2, 3 (0) Servo position 1 1
IN2 62 0, 1, 2, 3 (0) Servo position 2 2
Toggling between
servo position 1 and 2 3
Note: Toggling between servo positions:
The servo heads to the in each case other
end position.
Note: In order to activate the settings in CV##60 and 62, the value for CV#167 has to set to
"0" and the value for CV#168 to "1".
Assigning the sounds to the switching inputs
IN1 60 8,16,32,64 (0) Door´s bleeping when closing 8
IN2 62 8,16,32,64 (0) Train conductor´s whistle 16
IN3 64 8,16,32,64 (0) Signal horn 32
Bell 64
Note: In order to activate the settings in CV#64, the value for CV#167 has to set to "0" and
the value for CV#168 to "0".
Page 44