User manual

tams elektronik

English FD-R Extended

6.1. Connector pin assignment

Front side

Colour

of wire

Connection to

(for use of settings in state of delivery)

X1 white AUX1 (lighting forward motion, function key F0)

X2 yellow AUX2 (lighting backward motion, function key F0)

X3 green AUX3 (function key F1)

X4 violet AUX4 (function key F2)

X5 white AUX5 (function key F5)

white

AUX6 (function key F6)

brown

Loudspeaker: X7 = connection A (signal / -),

X8 = connection B (+)

X9 brown Negative pole (-) of buffer capacitor;

Earth connection for

reed contacts, Hall sensors and servo

X10

X11

red

black

Current collector (right / left in direction of motion):

X10= right current collector (or slider),

X11= left current collector (or vehicle ground)

X12 blue Return conductor for all functions (+);

Positive pole (+) of buffer capacitor;

Supply voltage for Hall sensors

X13 grey Switching input IN1

X14 grey Switching input IN2

X15 orange Servo output or switching input IN3

Rear side

Colour

of wire Connection to SUSI interface

X16 red Supply voltage (PLUS)

X17 blue Clock (CLK)

X18 grey Data (DATA)

X19 black Earth (GND)

Page 20