Manual
Table Of Contents
- 1. Getting started
- 2. Operation overview
- 3. Connections
- 3.1. Safety instructions
- 3.2. Safe and correct soldering
- 3.3. Avoiding irreparable damage to the decoder!
- 3.4. Pin assignment LD-G-43 | Front side
- 3.5. Pin assignment LD-G-43 | Rear side
- 3.6. Using decoders with interface connectors
- 3.7. Use of the LD-G-43 in locomotives with AC motor
- 3.8. Mounting decoders without interface
- 3.9. Connecting LEDs to the function outputs
- 3.10. Connecting inductive loads
- 3.11. Connecting the switching inputs
- 3.12. Connecting a backup capacitor or buffer circuit
- 3.13. Connection of a SUSI module
- 3.14. Completion
- 4. Programming
- 5. Configuration variables and registers
- 5.1. Overview configuration variables LD-G-43
- 5.2. Basic settings
- 5.3. Setting the address
- 5.4. Setting the motor control
- 5.5. Function mapping
- 5.6. Effects of the outputs
- 5.7. Settings for the switching inputs
- 5.8. RailCom and DCC-A settings
- 5.9. Settings for driving operation
- 5.10. Settings for analogue mode
- 5.11. Sensivity of the overload protection
- 5.12. Auxiliary functions
- 5.13. Information
- 6. Checklist for troubleshooting and error correction
- 7. Technical data
- 8. Warranty, EU conformity & WEEE
tams elektronik
tams elektronik LD-G-43
Outputs
not
in use
Special functions
off/on with
function
F0f
F0r
AUX1
AUX2
AUX3
AUX4
AUX5
AUX6
UPS
Stop with F
SG
ABD
Values
1 2 4 8 16 32 64 128 0
1
(on)
2
(on)
4
(on)
8
(off)
F0, F1, F2,
…, F28, ---
Input
values
0, 1, 2, 3, 4,…, 255
0
0, 1, 2, 3, 4,…, 15
0, 1, 2,
... 28, 255
Outputs
not
in use
Special functions
off/on with
function
CV
name
CV-
No.
Default
value
CV-
No.
CV-
No.
Default
value
CV-
No.
Default
value
F10 f 337 (0) 338 339 (0) 340 (255)
F10 r 341 (0) 342 343 (0) 344 (255)
F11 f 345 (0) 346 347 (0) 348 (255)
F11 r 349 (0) 350 351 (0) 352 (255)
F12f 353 (0) 354 355 (0) 356 (255)
F12 r 357 (0) 358 359 (0) 360 (255)
F13 f 361 (0) 362 363 (0) 364 (255)
F13 r 365 (0) 366 367 (0) 368 (255)
F14 f 369 (0) 370 371 (0) 372 (255)
F14 r 373 (0) 374 375 (0) 376 (255)
F15 f 377 (0) 378 379 (0) 380 (255)
F15 r 381 (0) 382 383 (0) 384 (255)
F16 f 385 (0) 386 387 (0) 388 (255)
F16 r 389 (0) 390 391 (0) 392 (255)
F17 f 393 (0) 394 395 (0) 396 (255)
F17 r 397 (0) 398 399 (0) 400 (255)
F18 f 401 (0) 402 403 (0) 404 (255)
F18 r 405 (0) 406 407 (0) 408 (255)
F19 f 409 (0) 410 411 (0) 412 (255)
F19 r 413 (0) 414 415 (0) 416 (255)
Configuration variables and registers | 47