Manual

tams elektronik
tams elektronik LD-G-43
Transfer of decoder parameters in the DCC-A registration procedure
The registration of the decoder with the central unit takes place automatically as soon as the
vehicle is placed on the track. Some of the parameters can be adjusted individually with the
help of the central unit.
Value Adjustments
Principle symbol
and symbol
e.g.:
The decoder can be assigned a principle
symbol and a symbol from the file stored in the
central unit.
Desired address 3 Address according to the settings in CVs 1 or
17/18
Address e.g. 1000 The address is assigned to the decoder by the
control unit and cannot be changed. If no
vehicle decoder with the same address is
available, the desired address set in the CVs is
adopted.
Name and short
name
LD-G-43 The decoder can be assigned its own name
and/or short name (max. 8 characters).
Product name LD-G-43 no change possible
Description --- no change possible
Manufacturer Tams Elektronik no change possible
UID e.g. 12345678 no change possible
Protocol e.g. DCC/28 Protocol according to the assignment in the
locomotive database / locomotive list of the
control unit
Version SW e.g. V2.00 no change possible
Version HW e.g. V1.0 no change possible
registered DCC-A Method by which the decoder was registered
with the control unit
Functions and
function icons
Specific icons can be assigned to the functions,
from which it is clear what they switch (e.g.
front lighting, interior lighting, shunting gear).
Operation overview | 21