Manual
Table Of Contents
- 1. Getting started
- 2. Operation overview
- 3. Connections
- 3.1. Safety instructions
- 3.2. Safe and correct soldering
- 3.3. Avoiding irreparable damage to the decoder!
- 3.4. Pin assignment LD-G-43 | Front side
- 3.5. Pin assignment LD-G-43 | Rear side
- 3.6. Using decoders with interface connectors
- 3.7. Use of the LD-G-43 in locomotives with AC motor
- 3.8. Mounting decoders without interface
- 3.9. Connecting LEDs to the function outputs
- 3.10. Connecting inductive loads
- 3.11. Connecting the switching inputs
- 3.12. Connecting a backup capacitor or buffer circuit
- 3.13. Connection of a SUSI module
- 3.14. Completion
- 4. Programming
- 5. Configuration variables and registers
- 5.1. Overview configuration variables LD-G-43
- 5.2. Basic settings
- 5.3. Setting the address
- 5.4. Setting the motor control
- 5.5. Function mapping
- 5.6. Effects of the outputs
- 5.7. Settings for the switching inputs
- 5.8. RailCom and DCC-A settings
- 5.9. Settings for driving operation
- 5.10. Settings for analogue mode
- 5.11. Sensivity of the overload protection
- 5.12. Auxiliary functions
- 5.13. Information
- 6. Checklist for troubleshooting and error correction
- 7. Technical data
- 8. Warranty, EU conformity & WEEE
tams elektronik
LD-G-43 tams elektronik
Protection
Protection class IP 00
Meaning: No protection against solid foreign bodies. No protection
against water.
Overload Automatic switch-off when the permissible total current is
exceeded or a short circuit at the motor output
("short-circuit shutdown")
Environment
For use in closed rooms
Ambient temperature during
operation
0 ~ + 60 °C
Permissible relative humidity
during operation
10 ~ 85% (non-condensing)
Ambient temperature during
storage
- 10 ~ + 80 °C
Permissible relative humidity
during storage
10 ~ 85% (non-condensing)
Other features
Dimensions (circuit board,
without PluX22 connector)
approx. 25 x 16 x 5.5 mm
Weights Item no. 41-04430 (without Kabel): approx. 2.0 g
Item no. 41-04431 (with soldered cables): approx. 4.0 g
Item no. 41-04432 (with NEM 652 connector): approx. 3.5 g
Item no. 41-04433 (with PluX22 plug): approx. 2.5 g
66 | Technical data