Manual
Table Of Contents
- 1. Getting started
- 2. Operation overview
- 3. Connections
- 3.1. Safety instructions
- 3.2. Safe and correct soldering
- 3.3. Avoiding irreparable damage to the decoder!
- 3.4. Pin assignment LD-G-43 | Front side
- 3.5. Pin assignment LD-G-43 | Rear side
- 3.6. Using decoders with interface connectors
- 3.7. Use of the LD-G-43 in locomotives with AC motor
- 3.8. Mounting decoders without interface
- 3.9. Connecting LEDs to the function outputs
- 3.10. Connecting inductive loads
- 3.11. Connecting the switching inputs
- 3.12. Connecting a backup capacitor or buffer circuit
- 3.13. Connection of a SUSI module
- 3.14. Completion
- 4. Programming
- 5. Configuration variables and registers
- 5.1. Overview configuration variables LD-G-43
- 5.2. Basic settings
- 5.3. Setting the address
- 5.4. Setting the motor control
- 5.5. Function mapping
- 5.6. Effects of the outputs
- 5.7. Settings for the switching inputs
- 5.8. RailCom and DCC-A settings
- 5.9. Settings for driving operation
- 5.10. Settings for analogue mode
- 5.11. Sensivity of the overload protection
- 5.12. Auxiliary functions
- 5.13. Information
- 6. Checklist for troubleshooting and error correction
- 7. Technical data
- 8. Warranty, EU conformity & WEEE
tams elektronik
tams elektronik LD-G-43
7. Technical data
Digital protocols
Data formats Motorola II
DCC (according to NMRA and RCN-standard)
Formats for the automatic
registration of vehicle
decoders
DCC-A according to RCN-218 (can be switched off)
Feedback format RailCom according to RCN-211 (can be switched off)
Interfaces, outputs and inputs
Decoder interface
(depending on decoder type and
version)
Item no. 41-04430: none
Item no. 41-04431: none / connection cables
Item no. 41-04432: 8-pole according to NEM 652
Item no. 41-04433: PluX22 according to RCN-122
SUSI interface
(all LD-G-43 versions)
Version classic SUSI according to RCN-600
Number of switching inputs 2
Number of switching outputs 8
Connection for backup
capacitor or buffer circuit
1
Connection for control line of
buffer circuit
1
according to RCN-530 (switches to earth)
Electrical properties
Power supply 12-24 volts digital voltage or analogue driving transformer
(direct or alternating voltage)
Current consumption
(without consumers) maximum 30 mA
Maximum total current
1,500 mA
Maximum motor current
1,000 mA
Maximum current per output
300 mA
Technical data | 65