Manual
Table Of Contents
- 1. Getting started
- 2. Operation overview
- 3. Connections
- 3.1. Safety instructions
- 3.2. Safe and correct soldering
- 3.3. Avoiding irreparable damage to the decoder!
- 3.4. Pin assignment LD-G-43 | Front side
- 3.5. Pin assignment LD-G-43 | Rear side
- 3.6. Using decoders with interface connectors
- 3.7. Use of the LD-G-43 in locomotives with AC motor
- 3.8. Mounting decoders without interface
- 3.9. Connecting LEDs to the function outputs
- 3.10. Connecting inductive loads
- 3.11. Connecting the switching inputs
- 3.12. Connecting a backup capacitor or buffer circuit
- 3.13. Connection of a SUSI module
- 3.14. Completion
- 4. Programming
- 5. Configuration variables and registers
- 5.1. Overview configuration variables LD-G-43
- 5.2. Basic settings
- 5.3. Setting the address
- 5.4. Setting the motor control
- 5.5. Function mapping
- 5.6. Effects of the outputs
- 5.7. Settings for the switching inputs
- 5.8. RailCom and DCC-A settings
- 5.9. Settings for driving operation
- 5.10. Settings for analogue mode
- 5.11. Sensivity of the overload protection
- 5.12. Auxiliary functions
- 5.13. Information
- 6. Checklist for troubleshooting and error correction
- 7. Technical data
- 8. Warranty, EU conformity & WEEE
tams elektronik
LD-G-43 tams elektronik
Outputs
not
in use
Special functions
off/on with
function
F0f
F0r
AUX1
AUX2
AUX3
AUX4
AUX5
AUX6
UPS
Stop with F
SG
ABD
Values
1 2 4 8 16 32 64 128 0
1
(on)
2
(on)
4
(on)
8
(off)
F0, F1, F2,
…, F28, ---
Input
values
0, 1, 2, 3, 4,…, 255
0
0, 1, 2, 3, 4,…, 15
0, 1, 2,
... 28, 255
Outputs
not
in use
Special functions
off/on with
function
CV
name
CV-
No.
Default
value
CV-
No.
CV-
No.
Default
value
CV-
No.
Default
value
F20 f 417 (0) 418 419 (0) 420 (255)
F20 r 421 (0) 422 423 (0) 424 (255)
F21 f 425 (0) 426 427 (0) 428 (255)
F21 r 429 (0) 430 431 (0) 432 (255)
F22f 433 (0) 434 435 (0) 436 (255)
F22 r 437 (0) 438 439 (0) 440 (255)
F23 f 441 (0) 442 443 (0) 444 (255)
F23 r 445 (0) 446 447 (0) 448 (255)
F24 f 449 (0) 450 451 (0) 452 (255)
F24 r 453 (0) 454 455 (0) 456 (255)
F25 f 457 (0) 458 459 (0) 460 (255)
F25 r 461 (0) 462 463 (0) 464 (255)
F26 f 465 (0) 466 467 (0) 468 (255)
F26 r 469 (0) 470 471 (0) 472 (255)
F27 f 473 (0) 474 475 (0) 476 (255)
F27 r 477 (0) 478 479 (0) 480 (255)
F28 f 481 (0) 482 483 (0) 484 (255)
F28 r 485 (0) 486 487 (0) 488 (255)
48 | Configuration variables and registers