User manual

English Locomotive decoders of the series 30 plus
Sound-Update (LD-G-36 plus only)
Name of CVs /
registers
No. Input value
(Default)
Remarks and Tips
Sound-Update 103 0, 1 (0) Update impossible 0
Update possible 1
Hint: When entering the value "1" for CV#103, no sound will be played back! For that reason
you have to set the value for CV#103 back to "0" after a sound-update.
Setting the sound level (LD-G-36 plus only)
Name of CVs /
registers
No. Input value
(Default)
Remarks and Tips
Sound level 902 0 ... 255 (128) 0 = off
255 = maximum sound level
Assigning the function keys to the sounds (LD-G-36 plus only)
Name of CVs /
registers
No. Input value
(Default)
Remarks and Tips
F0 903 0 ... 8 (0) No sound 0
F1 904 0 ... 8 (3) Bell or horn 2 1
F2 905 0 ... 8 (2) Whistle or horn 1 2
F3 906 0 ... 8 (0) Standing or driving sound 3
F4 907 0 ... 8 (0) Decoupling or
door closing sound 4
F5 908 0 ... 8 (0)
F6 909 0 ... 8 (0) Fader for all sounds 8
F7 910 0 ... 8 (1)
F8 911 0 ... 8 (8)
F9 912 0 ... 8 (0)
F10 913 0 ... 8 (0)
F11 914 0 ... 8 (4)
F12 915 0 ... 8 (0)
Factory settings:
Function key F1 switches sound no. 3 (= standing or driving sound)
Function key F2 switches sound no. 2 (= signal horn1 or locomotive whistle)
Function key F11 switches sound no. 4 (= decoupling or door closing sound)
Function key F7 switches sound no. 1 (= signal horn 2 or bell)
Function key F8 switches fader (= fading in and down) for all sounds
Page 78