User manual

English Locomotive decoders of the series 30 plus
Assignment to the switching inputs
Name of CVs /
registers
No. Input value
(Default)
Remarks and Tips
Assigning the function outputs to the switching inputs
IN1 61 0 … 255 (0) F0f 1
IN2 63 0 … 255 (0) F0r 2
Hint: The switching inputs are released
respective to decoder ground. If you want to
release them respective to rail ground, you have
to mount a resistor (3,3 kOhm).
Hint: If you want to trigger sound functions or
the servo via the switching inputs, you have to
assign them to a function key (CV#62 and #64).
AUX1 4
AUX2 8
AUX3 16
AUX4 32
AUX5 64
AUX6 128
Assigning the functions to the switching inputs
IN1 62 0...255 (0) F1 1
IN2 64 0...255 (0) F2 2
The functions are released both via the function
keys and the assigned switching input.
Hint: The switching inputs are released
respective to decoder ground. If you want to
release them respective to rail ground, you have
to mount a resistor (3,3 kOhm).
F3 4
F4 8
F5 16
F6 32
F7 64
F8 128
Setting the minimum on-time of the switching inputs
Name of CVs /
registers
No. Input value
(Default)
Remarks and Tips
IN1 177 0 … 255 (1) = Length of time for the input
to be switched on after having
been connected to earth.
Increasing the value by "1" will
prolong the lenght of time by
1,1 sec.
0 = 0 sec. (off)
255 = 280.5 sec. (> 4 min.)
IN2 178 0 … 255 (1)
Page 72